Rtsp Windows 10

1. A

   streaming IP camera

   I managed to stream my IP camera with OBS. (by using 'rtsp://admin:password@IP:554/stream1' in MEDIA SOURCES). Now I'm looking for a way for someone to stream my IP camera from their place. Would that be even possible?
2. J

   Ghosting/Pixelation

   I am experiencing this ghosting / pixelation as seen in the image below. This happens in OBS, using an RTSP stream on a dedicated gigabit network. When I check VLC using the same RTSP URL and the camera 'preview' on the camera's own webpage, we do not see the same issue. The camera bitrate.

   • Thread
   • Replies: 6
   • Forum: Windows Support
3. M

   RTSP PTZ Preset Options

   I would like to use two different presets with my camera without having to log into the camera each time.I've heard it possible but haven't found much this far to support what I've heard.I was curious if anyone in the forum had any experience with this or some ideas on how to handle my.
4. E

   Distortion when using RTSP within OBS

   Hi all,I have recently installed 4 IP PTZ cameras to livestream some events we have at my work, and I am getting some strange distortion of footage which I'm trying to nail down as to what the cause is, so I was wondering if anyone has had similar issues whilst doing a multi-camera production.
5. S

   OBS-RTSPServer1.1.3

   简体中文OBS-RTSPServerThis is a plugin for obs-studio, encoding the output and publish rtsp stream.Supported Platforms : Windows 7 , Windows 8 , Windows 10 and LinuxSupported OBS Studio version : 24.0.0+InstallWindowsYou can use installer to install and the installer can be found in.
6. B

   Question / HelpStreaming from VLC application into OBS?

   I would like to build a shell recipe in which the output of the video window is sent into OBS directly.It is an edge case and I am aware of the OBS 'VLC playback' function but it doesn't fully suit my needs in terms of playlist editing and subtitle display. The configuration is also tricky for.
7. P

   Question / Helprtsp-webcam connection gets lost every day

   Hello everybody,I use the OBS Studio to stream a live video of our webcam on Youtbube.So far, this works very well.I get the picture via the RTSP address of our WebCam over the network (everything connected via cabling and switch).This also works perfectly.Only the OBS Studio loses the.
8. E

   Bug ReportRTSP freezing on VLC Source

   I've got a Hikvision camera that I connect to via RTSP and import via a VLC source.I've noticed that the feed freezes randomly (sometimes after a few seconds, sometimes - after a few minutes).Normally, when I use 'Media Source' (which is relatively stable, but has it's own issues - like.
9. P

   Question / Helprtsp connections

   Dear Sirs,Which system do you recommend for making a remote connection with the program?I would like to make video connections with external sources via mobile phone.best regardsWalter
10. D

    Question / HelpHikvision DS-2DE4425IW-DE RTSP problems

    Dear,We would like to livestream the building of worlds biggest bonfire next week 24/7 to youtube. For this we would like to use the Hikvision DS-2DE4425IW-DE with OBS Studio. Unfortunately, i can open this stream url rtsp://admin:xx@xx.xx.xx.xx:554/Streaming/Channels/101 everywhere, except in.
11. D

    Question / HelpHikvision DS-2DE4425/W-DE RTSP problems.

    Dear,We want to use the Hikvision DS-2DE4425/W-DE to live capture the building of our bonfire to youtube.I use this link: rtsp://admin:xx@0.0.0.:554/Streaming/Channels/101 to get the RTSP stream. The stream does work on VLC media player on my computer and on the RTSP player on my phone, but.
12. P

    Question / HelpOBS hangs when RTSP source is used

    Hello there,I have a very strange problem. I have a few IP cameras (exactly the same make, same model, same config). Some of them work with OBS as an RTSP source, but while I connect the others, the application hangs.I managed to track this hang to these RTSP sources by adding scenes with.
13. A

    Question / HelpRTSP freezing using cctv cameras

    Hello,I'm currently running a volley ball competition and I want to stream it on Youtube. To do so, I'm using CCTV cameras from which one I take the stream via 'media source' in OBS. I'm using this rtsp URL '.

Real Time Streaming Protocol is used to stream online radio stations, streaming video and podcasts. While some websites play the stream for you in your Web browser, other streams can only be accessed with a desktop client. How old to gamble online. Many media players are capable of connecting to and playing RTSP streams. Xbox One, Windows 10 version 16299.0 or higher: Architecture: ARM, x64, x86: Touch: Integrated Touch: Mouse: Integrated Mouse: Open in new tab. Sign me up Stay informed about special deals, the latest products, events, and more from Microsoft Store. Available to United States residents.

Media Foundation supports the following protocols:

• Real Time Streaming Protocol (RTSP)

  RTSP is mainly used for streaming media content. It can use UDP or TCP as transport protocols. UDP is the most efficient for content delivery because the bandwidth overhead is less than with TCP-based protocols. Even though the TCP protocol ensures reliable packet delivery, TCP is not well suited for digital media streams, where efficient use of bandwidth is more important than occasional lost packets.

• Hypertext Transfer Protocol (HTTP)

  HTTP uses TCP and is used by web servers. The 'httpd://' scheme indicates that the source is downloadable from a web server. HTTP is also used in case of firewalls, which are usually configured to accept HTTP requests and typically reject other streaming protocols.

The application can get the protocols supported by Media Foundation by using the IMFNetSchemeHandlerConfig interface. To do this, the application must first retrieve the number of protocols, by calling IMFNetSchemeHandlerConfig::GetNumberOfSupportedProtocols and then get the protocol type based on the index by calling IMFNetSchemeHandlerConfig::GetSupportedProtocolType. This method returns one of the values defined in the MFNETSOURCE_PROTOCOL_TYPE enumeration.

The application can also get the schemes supported by the source resolver by calling the MFGetSupportedSchemes function.

Protocol Rollover

When an application specifies 'mms://' as the URL scheme, the source resolver performs a protocol rollover operation. In this process, the source resolver determines the best protocol for the network source to use for getting the content. Typically, for media steaming, RTSP with UDP (RTSPU) is more efficient than HTTP. However, if the content is hosted on a web server, HTTP is a better choice.

Protocol rollover can also occur when an attempt to use the protocol specified in the URL scheme fails. For example, a protocol can fail when a firewall blocks UDP packets. In this case, the source resolver switches to HTTP.

Protocol rollover does not apply if the URL scheme contains a specific protocol, such as 'rtspu://'. Also, rollover is not performed if authentication fails or the server has reached a limit of client connections. It is recommended that applications specify the 'mms://' scheme and allow the source resolver to select the best protocol for the scenario.

The following table lists the rollover order.

Retrieving the Current Protocol

After a protocol rollover operation, the network source might use a protocol other than the one specified by the application in the URL scheme. Bluestacks desktop download. The protocol rollover result is available to the application after the network source establishes the connection with the media server.

1. A

   streaming IP camera

   I managed to stream my IP camera with OBS. (by using 'rtsp://admin:password@IP:554/stream1' in MEDIA SOURCES). Now I'm looking for a way for someone to stream my IP camera from their place. Would that be even possible?
2. J

   Ghosting/Pixelation

   I am experiencing this ghosting / pixelation as seen in the image below. This happens in OBS, using an RTSP stream on a dedicated gigabit network. When I check VLC using the same RTSP URL and the camera 'preview' on the camera's own webpage, we do not see the same issue. The camera bitrate.

   • Thread
   • Replies: 6
   • Forum: Windows Support
3. M

   RTSP PTZ Preset Options

   I would like to use two different presets with my camera without having to log into the camera each time.I've heard it possible but haven't found much this far to support what I've heard.I was curious if anyone in the forum had any experience with this or some ideas on how to handle my.
4. E

   Distortion when using RTSP within OBS

   Hi all,I have recently installed 4 IP PTZ cameras to livestream some events we have at my work, and I am getting some strange distortion of footage which I'm trying to nail down as to what the cause is, so I was wondering if anyone has had similar issues whilst doing a multi-camera production.
5. S

   OBS-RTSPServer1.1.3

   简体中文OBS-RTSPServerThis is a plugin for obs-studio, encoding the output and publish rtsp stream.Supported Platforms : Windows 7 , Windows 8 , Windows 10 and LinuxSupported OBS Studio version : 24.0.0+InstallWindowsYou can use installer to install and the installer can be found in.
6. B

   Question / HelpStreaming from VLC application into OBS?

   I would like to build a shell recipe in which the output of the video window is sent into OBS directly.It is an edge case and I am aware of the OBS 'VLC playback' function but it doesn't fully suit my needs in terms of playlist editing and subtitle display. The configuration is also tricky for.
7. P

   Question / Helprtsp-webcam connection gets lost every day

   Hello everybody,I use the OBS Studio to stream a live video of our webcam on Youtbube.So far, this works very well.I get the picture via the RTSP address of our WebCam over the network (everything connected via cabling and switch).This also works perfectly.Only the OBS Studio loses the.
8. E

   Bug ReportRTSP freezing on VLC Source

   I've got a Hikvision camera that I connect to via RTSP and import via a VLC source.I've noticed that the feed freezes randomly (sometimes after a few seconds, sometimes - after a few minutes).Normally, when I use 'Media Source' (which is relatively stable, but has it's own issues - like.
9. P

   Question / Helprtsp connections

   Dear Sirs,Which system do you recommend for making a remote connection with the program?I would like to make video connections with external sources via mobile phone.best regardsWalter
10. D

    Question / HelpHikvision DS-2DE4425IW-DE RTSP problems

    Dear,We would like to livestream the building of worlds biggest bonfire next week 24/7 to youtube. For this we would like to use the Hikvision DS-2DE4425IW-DE with OBS Studio. Unfortunately, i can open this stream url rtsp://admin:xx@xx.xx.xx.xx:554/Streaming/Channels/101 everywhere, except in.
11. D

    Question / HelpHikvision DS-2DE4425/W-DE RTSP problems.

    Dear,We want to use the Hikvision DS-2DE4425/W-DE to live capture the building of our bonfire to youtube.I use this link: rtsp://admin:xx@0.0.0.:554/Streaming/Channels/101 to get the RTSP stream. The stream does work on VLC media player on my computer and on the RTSP player on my phone, but.
12. P

    Question / HelpOBS hangs when RTSP source is used

    Hello there,I have a very strange problem. I have a few IP cameras (exactly the same make, same model, same config). Some of them work with OBS as an RTSP source, but while I connect the others, the application hangs.I managed to track this hang to these RTSP sources by adding scenes with.
13. A

    Question / HelpRTSP freezing using cctv cameras

    Hello,I'm currently running a volley ball competition and I want to stream it on Youtube. To do so, I'm using CCTV cameras from which one I take the stream via 'media source' in OBS. I'm using this rtsp URL '.

Real Time Streaming Protocol is used to stream online radio stations, streaming video and podcasts. While some websites play the stream for you in your Web browser, other streams can only be accessed with a desktop client. How old to gamble online. Many media players are capable of connecting to and playing RTSP streams. Xbox One, Windows 10 version 16299.0 or higher: Architecture: ARM, x64, x86: Touch: Integrated Touch: Mouse: Integrated Mouse: Open in new tab. Sign me up Stay informed about special deals, the latest products, events, and more from Microsoft Store. Available to United States residents.

Media Foundation supports the following protocols:

• Real Time Streaming Protocol (RTSP)

  RTSP is mainly used for streaming media content. It can use UDP or TCP as transport protocols. UDP is the most efficient for content delivery because the bandwidth overhead is less than with TCP-based protocols. Even though the TCP protocol ensures reliable packet delivery, TCP is not well suited for digital media streams, where efficient use of bandwidth is more important than occasional lost packets.

• Hypertext Transfer Protocol (HTTP)

  HTTP uses TCP and is used by web servers. The 'httpd://' scheme indicates that the source is downloadable from a web server. HTTP is also used in case of firewalls, which are usually configured to accept HTTP requests and typically reject other streaming protocols.

The application can get the protocols supported by Media Foundation by using the IMFNetSchemeHandlerConfig interface. To do this, the application must first retrieve the number of protocols, by calling IMFNetSchemeHandlerConfig::GetNumberOfSupportedProtocols and then get the protocol type based on the index by calling IMFNetSchemeHandlerConfig::GetSupportedProtocolType. This method returns one of the values defined in the MFNETSOURCE_PROTOCOL_TYPE enumeration.

The application can also get the schemes supported by the source resolver by calling the MFGetSupportedSchemes function.

Protocol Rollover

When an application specifies 'mms://' as the URL scheme, the source resolver performs a protocol rollover operation. In this process, the source resolver determines the best protocol for the network source to use for getting the content. Typically, for media steaming, RTSP with UDP (RTSPU) is more efficient than HTTP. However, if the content is hosted on a web server, HTTP is a better choice.

Protocol rollover can also occur when an attempt to use the protocol specified in the URL scheme fails. For example, a protocol can fail when a firewall blocks UDP packets. In this case, the source resolver switches to HTTP.

Protocol rollover does not apply if the URL scheme contains a specific protocol, such as 'rtspu://'. Also, rollover is not performed if authentication fails or the server has reached a limit of client connections. It is recommended that applications specify the 'mms://' scheme and allow the source resolver to select the best protocol for the scenario.

The following table lists the rollover order.

Retrieving the Current Protocol

After a protocol rollover operation, the network source might use a protocol other than the one specified by the application in the URL scheme. Bluestacks desktop download. The protocol rollover result is available to the application after the network source establishes the connection with the media server.

Microsoft docs online. To get the protocol and transport that are used for getting the content, the application can retrieve the property values for the MFNETSOURCE_PROTOCOL property and the MFNETSOURCE_TRANSPORT property of an IPropertyStore object from the network source.

Windows 10 Download

The following code shows how to get these values.

In the preceding example code, IPropertyStore::GetValue retrieves the MFNETSOURCE_PROTOCOL value, which is a member of the MFNETSOURCE_PROTOCOL_TYPE enumeration. For MFNETSOURCE_TRANSPORT, the value is a member of the MFNETSOURCE_TRANSPORT_TYPE enumeration.

Rtsp Windows 10

Alternately, the application can get the same values by using the MFNETSOURCE_STATISTICS_SERVICE service. To use this service, the application can call the MFGetService function to get the property store from the network source. This property store contains network statistics in the MFNETSOURCE_STATISTICS property. Protocol and transport values can be retrieved by specifying MFNETSOURCE_PROTOCOL_ID and MFNETSOURCE_TRANSPORT_ID—defined in the MFNETSOURCE_STATISTICS_IDS enumeration. The following code shows how to get the protocol and transport values by using the MFNETSOURCE_STATISTICS_SERVICE service.

Enabling and Disabling Protocols

The application can configure the network source so that certain protocols are skipped during the rollover process. To do this, network source properties are used to disable specific protocols. The following table shows the properties and the protocols they control.

Related topics